Outline
This tester is a device required to measure the tensile and compressive strength of materials (concrete, reinforcement, metal, non-metal) that require a high-load capacity. It uses a low-noise hydraulic pump to minimize noise and vibration generated during operation. It is a structure that can install a elongation meter to measure elongation if necessary. All controls during testing are controlled by a PC. It is also manufactured in a structure that can perform all tests and input/output and store data in the PC mounted on the tester.
Specification
| Item / Model |
|
DYMS-100 |
DYMS-300 |
DYMS-500 |
DYMS-1000 |
DYMS-2000 |
| Capacity |
|
10tf |
30tf |
50tf |
100tf |
200tf |
| Resolution |
|
1/10000 |
| Minimum measurement |
|
1kgf |
3kgf |
5kgf |
10kgf |
120gf |
| Load Detection and Precision |
|
Hydraulic Cell (Option : Load Cell) / ±0.5% within |
| Control method |
|
Data Acquisition with Computer |
| Load-pressing method |
|
Hydraulic Servo Type |
| Test speed |
|
0.5~100mm/min |
| Test effective area |
|
400×400×550 |
500×500×550 |
550×500×550 |
600×550×550 |
750×730×550 |
| Cylinder administration |
|
200mm |
| Display |
|
Load (Peak, Free), Strain (Peak, Free) |
| Load control |
|
Digital Controller |
| Hydraulic pump |
|
Rotary Plunger Pump (9unit) |
| Crosshead Transfer Motor |
|
400W |
750W |
| Power |
|
| 1.5kW |
2.4kW |
| AC 220V, 60Hz, 3Φ | |
| Standard accessory |
|
Tensile Grip-1set, Compression Plate-1set Bending Jig-1set |
| Size |
|
1800×800×160mm |
2000×880×2000mm |
2100×980×2300mm |
2200×980x2350mm |
2700×1100×2800mm |
| Weight |
|
700kg |
1000kg |
1300kg |
1500kg |
2000kg |
| Selective Specifications |
|
Extensometer (for Metal) & Indicator
Servo Control System (Computer Control with Digital Controller) |
HOME > PRODUCT
